• Search for:
    27Apr, 2021
    Specification of PD-MIMS Unit
    On-Line Partial Discharge
    On-Line Partial Discharge

    PDSurveillantTM: PD-MIMS

    PD-MIMS (Motor Insulation Monitoring System) detects partial discharge (PD) coming from the inside of high voltage motors and generators, the PD signal coupling in each phase (A, B, C Phase) using capacitor coupler. This system executes the surveillance and canalization of insulation condition of the high voltage motors and generators through QM/NQN analysis.

    PD-MIMS provides user friendly software which allows access to the measured data from a remote office using RS-422/485 and LAN.

    PD-MIMS also provides software which is designed to analyze, manage and interpret measured data and can be set to report daily, weekly or monthly.

    • PD-MIMS continually monitors and stores test results.
    • Detects abnormal conditions in motors and generators giving early warning when action is needed to prevent failure.
    • Reduces maintenance costs and operational expenses.
    • This test device continuously scans between 200kHZ – 300MHz.

    Figure 1 The motor and generator

    Figure 2 EMCs sensor on generator

    Figure 3 Display of Partial Discharge Measured Data

    System Configuration

    Detailed specification

    System type: PD-MIMS_SCM-01
     : Mounted type
    Number of channel : 3
    Input impedance: 50 Ω
    Sensor: Epoxy Mica Coupler (80 pF/6.6 kV)
    Noise rejection: BPF (Band pass filter), PD shape recognition (Pattern recognition), PD counts in burst are captured (Envelop)
    Frequency bandwidth: 200 kHz – 300 MHz, ±3dB Max
    System configuration: Programmable parameters option allows the user to set each phase of generator and motor
     : Provides early warning signal for potential failures
     : Auto mode operation
    System operation: Win 98/NT/2000/XP Environment
    Display unit: Operation status
     : Alarm
    Data management: Partial Discharge counts in bursts are captured
     : Analysis of pulse count distribution per phase
     : 2D, 3D and QM&NQN graphic display for ease of diagnosis
    Data analysis: Ability to trend and forecast a known fault
     : User setting are possible for data collection
    Communication: RS-232, 15m (19200 bps)
     : RS-422, 500m (19200 bps)
     : LAN (TCP/IP)
    Power requirement: 110/240VAC, 50/60HZ, 1A/0.5A
    Size: 13”(W) x 13”(H) x 6”(D), 12 lbs
    Application targets: Motor and Generator
    19Apr, 2021
    Protection Relay

    sMPR-3000F

    Power , Voltage & Current Meter
    _________________
    18 Functions For Motor Protection With Short Circuit
    _______________
    Motor Insulation Measurement 24 VDC For Safety
    ________________
    Temperature Protection with PT100
    _______________
    temperature and Humidity inside the panel
    _______________
    4-20 mA Input for Vibration, Gas Pressure, Flux or etc.

    MtecH

    sMPR-3000F

    SMART MOTOR
    PROTECTION RELAY
    Intelligent Smart Energy Monitoring and Protection Relay
    ● The best products for implementing Smart MCC (Microcontroller unit control)
    ● Power Meter, saving maintenance costs and integrating the Motor Protection
    Relay to single device products
    ● Current real-time control system in unmanned, voltage, energy saving of about
    10% over the amount of power measurement
    ● Improve the maintenance and safety of a more efficient motor of the industry
    through the fault waveform record
    ● The special functions are included as Insulation Resistance Measurement,
    Temperature inside the motor, Temperature and Humidity inside the MCC and
    4-20mA Input

    3Apr, 2021
    On-Line Partial Discharge

    Advanced Power Equipment (Thailand) Co., LTD was founded in 2001 at Thailand. Advanced Power Equipment (Thailand) Co., Ltd are specialist to do design, installation, and commissioning in motor starter and motor protection by focused on low voltage motor until high voltage motor for oil & gas, comment, Petrochemical Commercial, Iron factory, Food, etc. and also introduced the solution below:

    • Measuring power quality in the electrical system, Consult and design the electrical system to solve and improve the electrical quality.
    • Design and make the MDB Cabinet, Motor Starter Cabinet: MCC with automation controller system.
    • Test and repair VSD Equipment, Soft Starter, ACB and MCCB: Siemens.
    • To consult for Motor Starter, Energy Saving in the industries.
    • To consult about On-Line Partial Discharge Monitoring Diagnosis for High Voltage Equipment.

    www.powerpd.com

    On-Line Partial Discharge